XE22 wrote as follows on 14/09/05 13:41:

>To: os2hardware{at}yahoogroups.com
>From: xe22{at}optonline.net
>Subject: Re: [OS2HW] Installation stops.
>
>** Reply to note from rvgreen{at}telusplanet.net Tue, 13 Sep 2005 18:59:30
>-0500
>
>
>  
>
>>>> >Is that the *only* disk in this particular system?
>>>> >If it is can you mount it in another working machine
as a slave and  
>>>> >redirect the output from "LVM /QUERY:ALL
," to >>> >disk file>.
>>>      
>>>
>>>  
>>> No Mike,it is disk 1 of three,naster on primary controler,disk2 is 
>>    
>>
>slave on
>  
>
>>> this controller,disk 3 is a serialatadisk. dvdc\.cdreader is master on
>>> secondary controller,dvd.cd burner is slave on the same.
>>>  
>>> I will pull one dimm out nd see. I have 1 gb of ram. No other runnimg 
>>    
>>
>machine
>  
>
>>> here.The other one had the same problem,but has only 1 hd + a 
>>    
>>
>cdtrader.Has 1
>  
>
>>> gb of ram as well.
>>    
>>
>
>If you are running SATA/IDE many mainboards only allow 4 total peripherals.
>Did you try installing with only one or two hard drives installed?
>

You mean that only "4 total peripherals" are allowed due to having only 
2 on-board controllers with a maximum of 2 devices per controller.  If 
this is the case with his mainboard, then I presume that Vic has added 
another controller for his 3rd SATA drive, so perhaps this is the source 
of the problem... just my WAG.

-- 
 Ciao,
      Kenn
  _____________________________________________________________________
        Always act as if life is a joyous journey. - Kenn Yuill
                __________ A Quote for Today __________
           Honestly, Dave, I've given this a lot of thought.
   I've seen these things before and it has always been human error.
                 - HAL9000 - "2001, A Space Odyssey"
 _____________________________________________________________________
           * TagZilla 0.057 * http://tagzilla.mozdev.org>


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---