In a message dated 12-09-14, Joe Delahaye said to Holger Granholm:

Hi Joe,

 HG> The OS/2 installation is very straightforward and easy especially the
 HG> Warp 4 one because of the detailed information carried in the documen-
 HG> tation in the "Up and running with OS/2 version 4" book .........


JD> The trouble with the OS/2 Warp installation was that it would not
JD> install.  I tried numerous times.  Same error each time.  It simply
JD> did not see my CD drive.  Tried different drive, same problem

I'm surprised to learn this because I have never exprienced difficulties
at installation. In 1995 I added a Hitachi CD-drive without problems and
later (-98) changed it to a Nakamichi 5-disk changer w/o problems again.

In the meantime I had also used a HP CD drive w/o problems.

I did use the Adaptec aspicd driver in both the two earlier instances,
then the Nakamichi was delivered with mjaspi drivers.

You had to be careful at the first installation that you didn't have
a HD over 2 Mb size. That was solved by installing OS/2 on a <2Mb
partition and after that formatting the rest of the HD.

Then came the Danis's drivers that solved the HD problem and later also
new drivers from IBM.

I have never tried to install OS/2 on anything else but SCSI systems.


CU L8ER, Sam, OH0NC

aka Holger

___
 * MR/2 2.30 * Nothing is foolproof.  Fools are SO ingenious!


--- PCBoard (R) v15.22 (OS/2) 2