* Reply to message originally in area CarbonArea

Hello Benny!

Mon Feb 29 2016, Benny Pedersen wrote to Gert Andersen:

 GA>> It is not the rule file for it by it is in /etc/init.d/ the net.lo and 
 GA>> net.eth0 give problems by gentoo fido2 not read the networkd ethnet 
 GA>> files as it shall. By more that the net.lo file have some problems to 
 GA>> work with thet other net.eth* files

 BP>why do you ask me about help if you dont listen ?

I listen to you but the problem was not that the net rule file not working
it was that the interfaces not got startup and it got to look like it there
was either the kernel there not got read the net.* as it should so it not
got load and start net.lo net.eth0 and net.eth1
After several tries with the sysrescuecd cdrom startup was it not the
netcards or the others, by sys rescue find and startup the netcard but with
the new names and when I tried to use and try out using the harddisk boot
read sda3 configs sda1 as the cdrom sys rescue was it on the harddisk sda3
net files there seem to have errors in it for the network by right reading
the net.* files.
When I then testing the net.* files and move the net.lo to another tmp path
and reboot was it like there seem to something got begin to work and by
just copy net.eth0 to a net.lo file got the netcards to startup but some is
still missing by boot up as there is nothing show on the monitor of the ip
adresses.


 BP>stop wasting your time




  Take care,
            Gert

      - Get the best with linux - 

--- Msged/LNX 6.2.0 (Linux/2.6.39-gentoo-r1 (x86_64))