Si:
Thanks for the advice. I'm headed there (Winnov and eBay) now.

Sheridan

"Si Ballenger"  wrote in message
news:419d4872.511839085{at}news.comporium.net...
> On Thu, 18 Nov 2004 00:47:36 -0800, "S C A"
>  wrote:
>
> >Dear Group:
> >I'm trying to develop an app that processes (saves to file and allows you
to
> >view) multiple video inputs from ONE bt878 video capture card. Problem is
> >that after visiting www.shrinkwrapvb.com and using the ezvidcap60.ocx,
I'm
> >only able to select one of the cameras (we've got two cameras at our
family
> >store) at a time. Even if I attempt to load two of the controls, I get an
> >error message. We can't really afford Lead Tools multimedia and was
hoping
> >someone would at least point me to some DLLs, OCXs or tutorials that will
> >help with multiple inputs on one device.
>
> You may want to look at getting a Winnov AV capture card on Ebay
> cheap and use it. It has a SDK and sort of does an auto switching
> between the inputs (3) when requested. Below is a test page with
> 3 cams connected to one card. When using one capture chip, you
> will have some delay when switching between video sources as the
> capture card has to resync with each video source on each switch.
>
>
> http://www.geocities.com/zoomkat/multiwc32.htm
>
---
þ RIMEGate(tm)/RGXPost V1.14 at BBSWORLD * Info{at}bbsworld.com

---
 * RIMEGate(tm)V10.2áÿ* RelayNet(tm) NNTP Gateway * MoonDog BBS
 * RgateImp.MoonDog.BBS at 11/19/04 5:53:22 AM