"Phil Parker" said:

>>I guess I'm not making the point very well.  I already did that (altho I
>>didn't say I had cleaned up the INIs) and the 0.56 installer declares the GI
>>is still there

>Further follow-up:

>You deleted appl "cwinst" and all three keys from os2.ini?

You were right, I found ADC_53 stuff on even my maintenance partition.

I've renamed files everywhere and run two different reliable INI
cleaners.  I've gone over INIs line by line with 3 different INI
programs.  I found and removed some very old junk, but nothing I could
identify as related to ADC.

The 0.56 installer still insists there is an old GI around.  On top of
that 0.56 says 0.56 is already installed, a flatly idiotic notion if
ever I heard one.  EVERY attempt has errored out (with the script error
I posted) after installing two files, a .in_ and a .log then asking
later if I wanted to delete them.  Of course after every failure to
install it pops up with with the message "Installation Complete!"

I Suspect I know why it won't install.  I flatly refuse to put anything
like this on my boot drive.  It looks to me like what happens is if a
different directory than default is selected he just has an END in the
branch logic (the END shown in the script error).  I can't prove it, but
I think this thing is a piece of s___.

Thanks

Jim L, via eCS 1.15 version of OS/2



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---