I have 2 of these units...for years now.

One of them, when powering on with the switch, it does not start immediately.

If I leave the PO switch *ON* for 20 seconds or so, ...BINGO...the printer
starts up and runs perfect.

Well, my IBM CE days tell me this PO switch is quite binary, ON or OFF.

Before I start tearing the covers off to get at the switch itself (understand this is
not easy), maybe someone here has experienced this problem and why there would
be such a delay.

This is not just OS/2 hardware, but hey, thought I'd give this group a try.

...Thanks....Gerry

Gerry Chilibeck.......in West Vancouver, Canada
Runnin' eCS 1.2, eCS 1.14, Lotus SS 1.72, PRMail 3.0, 
        RSJ 5.53, Moz 1.7.8, EmTec FTP, DragText 3.8, 
        Key Ring/2, XWorkplace 1.0.3, PN/2 156, OO 1.1.4      


------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---