In article ,
Ed Durrant  wrote:

> You might want to check the BIOS setting at boot up on the T23 - I don't 
> know this for a fact, but there could be options in the hardware to say 
> whether to access devices in the docking station or not.

Found the problem - I was just being a bit too gentle in my attempts to
seat the caddy. Works fine now, after I made sure it had gone all the
way home. I've now tried it with a floppy disk, a CD-RW/DVD combo and
the hard drive caddy. All work well.

> I was interested to hear that there's a PCI slot in the docking station 
> - presumably this is a low-profile half length slot ? Good for 
> multimedia add ins though I guess.

No, its a full height slot. It wouldn't take a very long card, but it
(for instance) will take a standard height NIC that I had lying around.


Quite a useful device all in all. Especially since I picked it up from
eBay for around 15 pounds Stirling :) 

paul.

-- 
paulm{at}waitrose.com
Marwick Computer Services - Chipping Norton, Oxfordshire, UK
OS/2, LAN and general Computer Consultants



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---