Hello Rj!

Sunday September 25 2016 12:59, you wrote to Andrew Leary:

 > Hi Andrew!

 >> Hello RJ!
 >> 26 Mar 16 08:17, you wrote to all:
 >>> Hi All!
 >>> 09 Mar 16 14:19, I wrote to all:
 >>>> I'm getting session errors like the following attempign to
 >>>> connect between this node (1:120/544) and the version v1.06 node
 >>>> I'm trying to test at 1:120/545, regardless of what I have the
 >>>> session password set to:
 >>>> ! 09-Mar-2016 14:02:01 mbcico[8395] Binkp: M_ERR
"Bad password"
 >>>> Is there something I forgot to include for the compile, perhaps?
 >>> I am still getting those on the v1.06 test system, regardless of
 >>> what I have the session password set to.  Any ideas of what might
 >>> be causing it?

 >> Can you netmail me a segment from the debug.log showing the problem?

 >    Didn't have a chance to do that, what the multiple problems I was
 > having with the servers on top of RealLife(tm) issues.

 >    I suspect it was an issue with the OS install or the hardware it
 > was running on, on that old system...
 >    I now have a 32 bit build (don't have the Debian pkg the way I want
 > yet...) of v1.0.6.8 that appears to be running with no issues on a new
 > system running Debian v8.  Was able to start it off with the config
 > data files from the old v0.92 install for 1:120/544. (Which
 > fortunately I had a backup of...)


Could the the installed packages on the O/S or more likely what isn't for mbse
compile, would need a very careful look at the required and recommended devel
elements that are needed along with any others listed as recomended.

Must admit here I have installed most of the kitchen sink other than for modem
usage and no I do not use Debian/ubuntu distros as I also need a development
system and find both have too many problems in that mode.



Vince

--- Mageia Linux v5/Mbse v1.0.6/GoldED+/LNX 1.1.501-b20150715