inkleput{at}isp.com wrote:
> Ray Davison  said:
> 
> 
>>>What I got was a piece of hardware, a in card  in a box.  I never got it
>>>to appear anywhere on the system when I plugged it in, so I figured it
>>>needed a driver.
> 
> 
>>After the MB BIOS lists the drives connected to it, the Promise BIOS 
>>will list the drives connected to it.  This will take place before the 
>>MB goes looking for something to boot.  It, like the MB controller, 
>>has two IDE connectors: 2 master, 2 slave.
> 
> 
> Sounds like nice work if you can get it.
> 
> Jim L, via eCS 1.15 version of OS/2

All I did was insert the card, connect the drives
and use them.
I later went to the Promise web page and DL'd some
later BIOS code and installed it.
I saw no spectacular changes with the new BIOS code.
Jerry


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---