Don{ald} O. Woodall wrote:
> Hello All You Poor Conductors
>
>      Do you think 480 Watts is enough to get the job done?
>
>             2 CD-ROM drives
>             1 CDR drive
>             1 DVD DRIVE
>             1 Tape drive
>             1 Smart Card - USB port connector(?)
>             2 3 1/2" Floppy drives
>             2 200GB PATA hard drives
>             1 motherboard
>      to start with.
>
>      OK, it is looking like the Antec Neopower 480 is the power supply I
> was drooling over back in March.
>   
I have the following attached to an EverCool 450

1 CDROM drive
1 DVDROM drive
1 Floppy drive
9 3.5 HDDs - 2GB, 9GB and a 45GB FULL heith 5.25
2 IBM SERVERAID Adapters
1 Adaptec 2920 Adapter
3COM 3C905 network adapter
56K USR MODEM
400MHZ Celeron motherboard with 228MB RAM

System powers and runs FINE. In spite of the fact that your motherboard 
will burn more power than mine, you still will have LESS of a load on 
the PS that what I am presenting to the PS.



-- 
http://www.boinc.dk/index.php?page=user_statistics&project=sah&userid=190817>




 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---