Hello CD Re-Writers

     It now certainly is looking like my hardware problem
was NOT!  It appears that the Memorex CD-RW disc's were
the problem.

  The name of this file is:  CDRW-Blank.log.014.ATAPI-Good-Cheap-Media

scsidev: '3,1,0'
scsibus: 3 target: 1 lun: 0
Using libscg transport code version 'schily-scsi-os2.c-1.22'
cdrecord: This version of cdrecord does not include
                                            DVD-R/DVD-RW support code.
cdrecord: If you need DVD-R/DVD-RW support,
                                   ask the Author for cdrecord-Prodvd.
Cdrecord 2.0 (i386-pc-os2_emx) Copyright (C) 1995-2002 Jörg Schilling
Using remote (pipe) mode for interactive i/o.
TOC Type: 1 = CD-ROM
Using libscg version 'schily-0.7'
atapi: 0
Device type    : Removable CD-ROM
Version        : 2
Response Format: 2
Capabilities   : 
Vendor_info    : 'SONY    '
Identifikation : 'DVD RW DRU-720A '
Revision       : 'JY03'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Drive current speed: 10
Drive default speed: 10
Drive max speed    : 10
Selected speed     : 4
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags   : MMC-3 SWABAUDIO BURNFREE FORCESPEED 
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P
                                                            RAW/R96R Drive
buf size : 1895168 = 1850 KB
 01 00 00 01 00 00 00 00
 01 AA 01 01 00 00 00 00
 01 00 A0 00 00 00 00 01 00 00 00 00
 01 00 A1 00 00 00 00 00 00 00 00 00
 01 00 A2 00 00 00 00 00 00 00 00 00
Track 1 start -150
Current Secsize: 2048
ATIP info from disk:
  Indicated writing power: 3
  Reference speed: 6
  Is not unrestricted
  Is erasable
  Disk sub type: High speed Rewritable (CAV) media (1)
  ATIP start of lead in:  -11745 (97:25/30)
  ATIP start of lead out: 359848 (79:59/73)
  1T speed low:  4 1T speed high: 10
  2T speed low:  4 2T speed high:  0 (reserved val  6)
  power mult factor: 1 5
  recommended erase/write power: 5
  A1 values: 24 1A D8
  A2 values: 26 B2 4A
Disk type:    Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Forcespeed is OFF.
Starting to write CD/DVD at speed 4 in real BLANK mode for single
                                                             session. Last
chance to quit, starting real write in 9 seconds.
                                            8 seconds.
                                            7 seconds.
                                            6 seconds.
                                            5 seconds.
                                            4 seconds.
                                            3 seconds.
                                            2 seconds.
                                            1 seconds.
                                            0 seconds.
Operation starts.
Performing OPC...
Blanking entire disk
Blanking time: 1271.330s

     Sorry it took me so long to work through this.

     Thanks

-- 
-----------------------------------------------------------
"Don{ald} O. Woodall"
-----------------------------------------------------------
This OS/2 system uptime is 0 days 13:28 hours           :^( (en).



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---