* Eveneens geplaatst in (also placed in) SUPRAFAX *
* Eveneens geplaatst in (also placed in) MODEM.028 *
Hello All,
This new ROM-upgrade is of today freqable on my system (2:285/255.1
+31-13-4636984)
Put a statement in your FDNODE.CTL (or a similar file if you're using another
mailer then FrontDoor):
phone 2:285/255.1 31-13-4636984
phone 15:900/9414 31-13-4636984
When done, compile again the nodelist and you would be able to request files 
on
my system.
The following upgrades are available:
12014425.zip     SupraFAXModem V34 extern                (magic-name 
UPE1201)
12114425.zip     SupraFAXModem V34 intern                (magic-name 
UPI1211)
12914425.zip     SupraFAXModem V34 intern PNP            (magic-name 
UPI1291)
13314425.zip     SupraSONIC 336V+                        (magic-name 
UPSONIC)
336now.exe       WIN95-flasher v1.440-12 ROM
12014412.exe     SupraFAXModem V34 extern v1.440-12 ROM
*BE˙AWARE*
The 1.440-12 code must first be loaded in your modem before you can use this
beta ROM-upgrade !!!
 -= Changes between the Supra 288 1.440-23 and the 1.440-25 ROM Code =-
1)  On some calls the transmitted INFO0 sequence did not
    indicate the 1664 point super constellation was supported.
    Depending on the remote modem this could cause a 28.8Kbps
    connect instead of a 31.2Kbps or 33.6Kbps connection.
2)  The +DS command parser would not allow both the BTLZ
    dictionary size and BTLZ max string lengths to be set in a
    single command.
3)  A timing problem on the SUP1331 that caused some class 2
    fax software to fail when receiving a fax has been fixed.
4)  A problem with the initialization of the NVRAM was fixed.
    Some S-registers were not being set to default values when the
    NVRAM was initialized.
5)  When connecting to some modems which have Rockwell ACi
    datapumps which are not configured for operation at
    33.6Kbps a problem could occur that would cause very high
    bit error rates at the remote modems receiver.  This would
    cause error correction negotiations to fail.  The problem
    does not occur if the remote Rockwell based modem is
    configured for 33.6Kbps operation, or if the remote modem's
    firmware includes certain Rockwell datapump fixes.
    The firmware's connection logic was modified so it can
    detect if the remote modem will have this problem, if it
    will the local transmitter is adjusted to prevent it.
All, regards & take care,
Henk            (e-mail: henk.loosbroek@pi.net)   [PGP KeyID: 9032BB1D]
Latest Supra-ROM (V34-PC-ext): 1.440-25-V34_DS (05 nov 96)(Magic: SUPE1201)
... KIRK:  No, I'm from Iowa.  I only work in outer space.
--- GED3 2.51.A0901+/FD 2.12+/GE 1.11+
---------------