In , on 01/14/2006 
   at 11:21 PM, "Andrew Belov"  said:

>On Sat, 14 Jan 2006 14:27:13 -0500, Don{ald} O. Woodall wrote:

>>     Now the next problem is that the ISP has passworded the
>>Modem\Router.
>>
>>     Any ideas how to get around the password?

>The default for ZyXEL is usually 1234. But because the firmware usually
>prompts to change this password as soon as it is entered, and it's likely
>what the ISP did, the only documented option then would be to revert to
>factory defaults. I wouldn't advise this step, however, unless you are
>sure you have all information pertinent to your account setup
>(authentication credentials, DSL VPI/VCI numbers, service type (if any),
>DNS addresses, and IP address/gateway type). And of course, the official
>manuals have to be downloaded from ZyXEL prior to doing anything - the
>Prestige series are extremely "configurable", and so could be easily
>misconfigured.

     Feeling better after a 3 hour nap...

Hi Andrew

     Thanks for the password suggestions. the things I tried
didn't work.

     And you are right, I am not about to do a reset.

     So that is why I got 2 sheets of paper with the thing
and no mamual. 

-- 
-----------------------------------------------------------
"Don{ald} O. Woodall"
-----------------------------------------------------------
This OS/2 system uptime is 0 days 00:06 hours           :^( (en).



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---