* An ongoing debate between Tom Walker and Ben Ritchey rages on ...

BR>>  everything but the Activity feed. Since Pin 39 is active LO I
BR>> can just tap onto/feed the ground side of the Red LED, correct? And
BR>> yes, I used a 470 pullup. ;)

| TW>  The PLUS side of the LED goes through the 470 Ohm Resistor to the
| TW> Plus Side of the Drive power Plug. The Negitive side of the LED goes
| TW> to Pin 39 where the Ground return is provided by the Circuit card on
| TW> the Hard Drive.

Right ...

--
Be well    :^)

 : Ben   aka cMech    http://bellsouthpwp.net/c/m/cmech617/
 :
 +    WildCat! Board 24/7  +1-337-232-4155  V92 56k  8,N,1
--- GoldEd+/DOS v1.1.5cM