In , on 12/03/2005

   at 02:37 PM, "Robert Traynor  (BobT)"
 said:

Hi Bob

>Hi Don,

>Using RSJ 5.05 and CDrecord/2 with AudioCDcreator.
>On my system with ide/scsi hard drives and 2* IDE DVD burners, I use the
>following settings in my eCS 1.1 config.sys.

>Simplified:-
>------------Quote On-------------
>rem  On a SCSI hard drive system, 
>rem  put your SCSI drivers here, before Dani

>BASEDEV=DANIS506.ADD

>BASEDEV=DANIATAP.FLT /EJ /v /A:1 /!SCSI /RSJ

>BASEDEV=OS2ASPI.DMD /ALL
>DEVICE=D:\OS2\BOOT\ASPIROUT.SYS

>REM *** RSJ CD-Writer File System ***
>REM BASEDEV=RSJIDECD.FLT
>DEVICE=D:\CDWFS\RSJSCSI.SYS
>IFS=D:\CDWFS\CDWFS.IFS
>RUN=D:\CDWFS\CDWFSD.EXE -p "N:/CDCACHE" -c20000 -b2048 -t2 -i3 -s4
>BASEDEV=LOCKCDR.FLT

>------------Quote Off-------------

>The main advantages are that I don't lose either DVD drive as a reader
>and RSJ and CDrecord2 both work.  RSJ still burns as drive Z: ONLY when
>the drive is "Attached" for the burning session.

>RSJ will only use the first DVD drive it finds thru its GUI but the
>second can be used from the commandline or by way of  CDRWSelV3_04.ZIP, a
>utility available on hobbes.
>http://hobbes.nmsu.edu/pub/os2/apps/mmedia/cd/cd-r/cdrwselv3_04.zip>

>This utility will also complain and make recommendations as to
>alterations in your config.sys to use it and RSJ and the Dani drivers.

>I generally use RSJ for data DVD's and CDrecord for iso's and CD burning.

>HTH,
>Regards,
>Robert Traynor (BobT).
>3 December 2005   14:35

     That is reassuring.

     I have just rebooted after adding Dani's drivers to my
config.sys.

     Now to see what CDRecord sees and does.

     Thanks


-- 
-----------------------------------------------------------
"Don{ald} O. Woodall"
-----------------------------------------------------------
This OS/2 system uptime is 0 days 00:06 hours           :^( (en).



------------------------ Yahoo! Groups Sponsor --------------------~--> 
Get fast access to your favorite Yahoo! Groups. Make Yahoo! your home page
http://us.click.yahoo.com/dpRU5A/wUILAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---