In , on 02/06/06
   at 08:39 PM, "Steve Wendt"  said:

>Kris said that SIO 1.60d didn't support PCI modems.  That's true - any
>testing  should probably be done with SIO2K instead.

It does not support them in the sense that it lacks the code to do a pci
bus scan and detect them.  It will operate them just fine if the port and
irq are manually specified and if the modem interface looks like a
standard uart.  What Ray added in sio2k was automatic detection and
support for the extended features and baud rates of some pci modems.

Steven

-- 
----------------------------------------------------------------------
"Steven Levine"   MR2/ICE 2.67
#10183 Warp/eCS/DIY/14.103a_W4
www.scoug.com irc.fyrelizard.com #scoug (Wed 7pm PST)
----------------------------------------------------------------------



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---