"Derek W. Keoughan"  said:



>>     Why can't a fanless power supply extend out that opening so the heat
>>sink is radiating heat outside of the case?

>Oh, but th
>can...

>http://www.thermaltakeusa.com/2005/purepower/w0029fanlesspsu/w0029fanles
>spsu.htm

And with a little comon sense the hole could be considerably bigger so
more fins could be used.  If there was an affordable unit available I'd
QUICKLy take a hack sw to the back of the computer case.  I may be
hesitant to minkey around with fan speeds, but I have no compunction
about physical matters like sheet steel.

For all that, cases could be made with an even bigger hole in the top. 
Fanless design would be a no brainer if the whole top of it were open to
fresh air.  Top _and_ back?  Visualize fins like thay had on cars in the
50's!!  ;-)

Jim L, via eCS 1.15 version of OS/2
-- 
Mo: Who has da best politishuns, 'Publicans or Demacrats?
Gizmo: Dey is all da same pardy, PublicRats.



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---