RL> AMD 5x86 133Mhz CPUs                     $89 These are the *ADZ*
 RL> models that are easily clockable to 160Mhz.

Re your 5x86 133 CPUs, Randall.  I have a AMD DX4/100 (N)V8T that just will
not run at a 40Mhz bus speed.  My SOYO 4SA W2/W5 board supports all CPUs to
160 but it freezes during boot up if I clock up my 486.  So how do you
achieve this feat of increasing the 33 Mhz busspeed of the 133 to 40Mhz ? I
can run it as a DX2/100 with a 50 Mhz busspeed and that is much quicker
than a DX4/100 with a 33 Mhz busspeed. I don't wish to dispute you, I am
just after some answers.  I have my eye on the 160 or the as yet unreleased
DX4/150 (3 * 50Mhz bus speed) as I believe these will be quicker than the
Cyrix 586/120 (clocked up 100) I currently have. The 486DX4/100 is on a
Gigabyte motherboard that will be a second computer one day.
I have relatives in Brisbane and Caboolture and if I purchase a CPU from
you they will send it to me, unless your postage cost is minimal.  I would
prefer the 150 over a 160 Mhz CPU as the higher busspeed gives more gain
over the slightly quicker CPU speed. Look forward to your reply.
Peter.

... Unknown Error on Unknown Device for Unexplainable Reason.
@NOTE: IceEdit 1.60 F12472
--- Ezycom V1.20 01fa0091