kish_44 schreef:

>sake of this discussion, let's choose '9'.  Then, since the US
>Robotics 5610B documentation says it will only run under COM5,
>  
>
Does the documentation tell you "it will only run under COM5" or does it 
say "you've to assign it to com5 through it's software"?

If the latter (as all USR I'm aware off do) , you'll need the software 
to be ported to eCS. And incidentally, if you go a couple of years back 
in the archives of this group, you'll encounter an entire tread about 
PCI US Robotics and you'll know my remark can't be safely ignored.


-- 
Groeten uit Gent,

   Kris




 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---