Ray Davison wrote:

> 
> If I could get them to use a common protocol.ini, and I could create 
> an interactive config.sys, I could select the mode during boot.
> 
> DHCP is set for 30 seconds.  It actually starts the countdown at 40. 
> In wireless mode, it times out, I have to press enter, it goes to 
> background mode, and sometime after boot settles the system connects. 
>   It would be preferable to just go straight to background mode.
> 
> 
> Ray
> 

Are you trying to run DHCP on both ports ? That doesn't seem to work, 
you will need to give at least one port a fixed IP address.

If both ports are connecting to the same IP range (ie same local 
network), you will not be able to have both connect at the same time. If 
you install WLAN Monitor it will take care of alerting you and asking 
which network you wish to use if both are active.

Hope this helps.

Cheers/2

Ed.


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---