James Arnold wrote:
> On Thu, 23 Feb 2006 21:58:53 -0500 Eugene Poole 
> wrote:
>> Subject: Dead NIC
>>
>> Ok, I'm running eCS 1.05 and my NIC died.  What's a good one to get?  
>> I'm running on a AMD Thunderbird 750Mhz, 768MB RAM, 80GB disk.
>>
>> Gene
> 
> 	The Intel Pro 10/100 NIC is fully supported. I ran the onboard version
> on an IBM NetVista with no problems. Any NIC based on the RealTek 8139
> chip set is fully supported. 3Com cards are usually a good
> bet. Cards based on the DEC Tulip chip set are really good if you can
> find any, too bad they are out of production.
> 
> 	More info about supported NICs and chip sets can be found on the
> OS2 Warp BE web site, http://www.os2Warp.be
> 
> 	Jim
> 
> =============================================================================
> James Arnold                                   ICQ: 9719182
>                                             e-mail: james.arnold{at}usa.net
>                                                web: http://www.arnold-ont.ca
> 

The intel Gigabit copper NIC - Intel Pro 10/100/1000 is also supported, 
in case you wish to plan for the future and home GB networks (needed if 
you are planning heavy multimedia transferring home systems).

Cheers/2

Ed.


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---