Hello,

this mornig I tried to connect an external 2,5" HDD which was running on a
USB2 Bridge from an external case on a USB3 Bridge from another case. (I
wanted to check whether I could switch HDD to standby with another USB Bridge)

Raspi did not start with USB3 Bridge plugged in and after disconnecting USB
device an rebboting the Raspi it also doesn't come up. No signal on HDMI
monitor. Red LED is lit up, green LED is flickering but it does not boot up
or power any USB devices.

Is there any fuse I can check?

--
Kind regrads
Andreas Bockelmann

--- SoupGate-Win32 v1.05