PS>LM>Am I the only one having this problem:
PS>LM>        While Qmodem is in Host mode, I call back to my computer and 
try 
PS>LM>drop  to Dos but can't seem to do so.  Yes, I've changed my status to
PS>LM>sysop status, used the proper password, etc.
PS>LM>        This has been the situation for ALL versions that I've used:
PS>LM>Qmodem 4.xTD, Qmodem 5.0x, and now Qmpro 1.53!
PS>I've had the smae problem.  I like to hear a sloution also.
        Have you read your Qmodem Pro Manual Chapter 5 - QmodemPro Host?
Be sure to read this whole chapter BEFORE attempting to use Host Mode...
To begin setting up the host, go to the "Config" Section of the
QmodemPro main menu bar. Select "Host" to pop up the Host Mode Config
dialog box.  You should select either a Closed or Callback Mode.  To
facilitate Drop to DOS, fill in Your Drop to DOS Password. (Required)
Select Full Path for Sysop Path Support.  If you want to be able to
Shutdown the system, remotely, then you must also specify a Shutdown
Password. Hope this helps...
Charles Raine           Internet: rainec@cyberspc.mb.ca
Phone: (204) 895-0940             charles.raine@mwcs.mb.ca
                                  charles_raine@mbnet.mb.ca
--- QScan/PCB v1.19b / 01-0105
---------------