Kenn Yuill wrote:
>     As written previously on this or other lists, my internal "Action 
> Tec Call Waiting PCI Modem" works fine with COM.SYS, ver. 1.2 and 
> Faxworks' driver, FMD.SYS.  It is identified as above and as a 
> "Lucent/Agere Venus WinModem" by PCI.EXE (PCI_VK).
>
>   
As is mine:

> Vendor 11C1h Lucent/Agere Systems (Was: AT&T MicroElectronics)
> Device 044Ah LT WinModem 56k
> Command 0007h (I/O Access, Memory Access, BusMaster)
> Status 0290h (Has Capabilities List, Supports Back-To-Back Trans.,
Emulated to com2 IRQ9.
>     Also, I got a handy utility from their web-site, PMDMCFG.EXE, which 
> scans for the modem and gives the port, i/o address & irq in a DOS CL 
> session.
Does this tool do anything or does it just tell us about the emulated data?

>   I don't know if this utility works for PCI modems with a 
> similar chipset from other manufacturers.  If anyone wants a copy of 
> this program to test its usefulness, let me know today so I can send out 
> only *one* e-mail with attached archive to everyone.
>
>   
I really would like to hear how  to get Faxworks to work with my 
emulated com2 irq9. All it sees at present is the real port 1 irq 4.

Incidentally, this is a class 2 modem, isn't it?

-- 
Groeten uit Gent,

   Kris




 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---