Russell, at 08:26 on Jan 24 1996, you wrote to Bill Grimsley...

RB> Check these figures against your v.34+ test files.
RB> I am back in my old stomping ground (Mossman, FNQ), 1800km from David's 
RB> Jabberwocky (Ascot, Bris) and I am getting 33600/33600 (both ways 
RB> everytime, like it used to be.)

If I didn't know for a fact that you are indeed currently in FNQ, I'd
suggest that you were telling porkies.  I simply can't believe the
following...

RB> Freq     Level
RB> 150     27
RB> 300     15
RB> 450     13
RB> 600     13
RB> 750     13
RB> 900     12
RB> 1050     12
RB> 1200     12
RB> 1350     13
RB> 1500     13
RB> 1650     13
RB> 1800     13
RB> 1950     13
RB> 2100     13
RB> 2250     13
RB> 2400     13
RB> 2550     13
RB> 2700     13
RB> 2850     14
RB> 3000     14
RB> 3150     14
RB> 3300     14
RB> 3450     16
RB> 3600     21
RB> 3750     30

I have never seen such excellent signal levels, not even locally.  And the
top roll-off frequency is positively astounding.  I guess that answers your
questions about the lines you have in Algester, doesn't it?

BTW, you didn't type those figures in yourself, did you?  Be honest.  :)

RB> Speed                  33600/33600
[ ... ]
RB> Modulation               V.34+
RB> Carrier Freq    ( Hz )   1959/1959
RB> Symbol Rate              3429/3429
RB> Trellis Code             64S-4D/64S-4D
RB> Nonlinear Encoding       ON/ON
RB> Precoding                ON/OFF
RB> Shaping                  OFF/OFF
RB> Preemphasis     (-dB )   2/2
RB> Recv/Xmit Level (-dBm)   17.1/12.1
RB> SNR             ( dB )   38.6
RB> Near Echo Loss  ( dB )   7.1
RB> Far Echo Loss   ( dB )   29.2
RB> Roundtrip Delay (msec)   23

Those Rx/Tx levels are almost unbelievable too.

RB> Might just have to move back permenantly and poll off Dave.... from here.

Well, if you don't, I might even consider moving up there myself.  Kind of
makes you wonder what's being used between FNQ and Brisbane, doesn't it?

Regards, Bill

--- Msgedsq/2 3.20