On Thu, 23 Feb 2006 21:58:53 -0500 Eugene Poole 
wrote:
> Subject: Dead NIC
> 
> Ok, I'm running eCS 1.05 and my NIC died.  What's a good one to get?  
> I'm running on a AMD Thunderbird 750Mhz, 768MB RAM, 80GB disk.
> 
> Gene

	The Intel Pro 10/100 NIC is fully supported. I ran the onboard version
on an IBM NetVista with no problems. Any NIC based on the RealTek 8139
chip set is fully supported. 3Com cards are usually a good
bet. Cards based on the DEC Tulip chip set are really good if you can
find any, too bad they are out of production.

	More info about supported NICs and chip sets can be found on the
OS2 Warp BE web site, http://www.os2Warp.be

	Jim

=============================================================================
James Arnold                                   ICQ: 9719182
                                            e-mail: james.arnold{at}usa.net
                                               web: http://www.arnold-ont.ca

Brought to you by the letters O S and the number 2
=============================================================================


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---