SC> The feedlines between the elements are phased - I don't know how
SC> many degrees.  On my ASP unit (2 bays) the feedline is 50 ohms -
SC> probably 1 wavelength long, but it shouldn't make a difference.
SC> This is split to 2 unknown impedence feedlines at what appears to
SC> be a simple "T".  These lines are each 1/4 electrical wavelength
SC> long, then there is a splice to another piece of unknown impedence
SC> feedline that is 1 wavelength long.
SC>
     Thanks for the reply Scott,  I'm going to build a 4 bay system
this weekend to test it out.  I found lots of coax in the basement so
I can play around with this impedence feedline problem.  Since I only
use one dipole tuned to 140 Mhz anything would be better.  Even if I
get it wrong I should be able to sqweeze a couple Db out of it!
                                            Alex...
--- QScan/PCB v1.17b / 01-0313
---------------