Julian Thomas wrote:
> What would it take to get it to run on a PCI only system and what software
> would I be wanting to use
Nothing but acquiering a pci scsi card (and the right cable).
>  (I'm very unsure of getting CopyShop to work
>   
It does. Works here fine with a bunch of adaptec2940UW and 29190.

It even works on my laptop with a PCMCIA Bustoaster card (thus copyshop2).
> with stock SCSI drivers).  I do have an Epson 2400 USB attached that works
> well with Tame.
>  
>   
Nonetheless, me thinks Tame/2 is very much preferable to Copyshop/2.

Incidentally, use copyshop/2 driver with the /N paramater, in order to 
not be bothered anymore when there is no scanner attached:

DEVICE=E:\OS2\BOOT\SCANOS2.SYS /N


-- 
Groeten uit Gent,

   Kris




 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---