In , on 02/17/06
   at 10:29 PM, "Julian Thomas"  said:

>What would it take to get it to run on a PCI only system and what
>software would I be wanting to use (I'm very unsure of getting CopyShop
>to work with stock SCSI drivers).  I do have an Epson 2400 USB attached
>that works well with Tame.

The 4P and CopyShop will work just fine with the 4P connected to a
standard PCI SCSI card.  For example, I run a 6P connected to a 2940UW.

When you switch over, you will use the scanos2.sys driver.


Steven

-- 
----------------------------------------------------------------------
"Steven Levine"   MR2/ICE 2.67
#10183 Warp/eCS/DIY/14.103a_W4
www.scoug.com irc.fyrelizard.com #scoug (Wed 7pm PST)
----------------------------------------------------------------------



 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---