Angus, at 11:39 on Aug 11 1996, you wrote to Bill Grimsley...

BG> Apart from the occasional outbound call where you may need to disable
BG> the V.42 detect phase, or the 3429 symbol rate (notably with some

AT> According to the manual this is done through ATS27=48. However I'm
AT> still a bit doubtful since the manual is has the S registers not
AT> correspondant to the S registers in the modem. eg the S register 56 is
AT> the S register 36 in the modem.. Suggestions??

Try S15=128 on the Dynalink.

Regards, Bill
@EOT:

--- MsgedSQ/2 3.50