On Sun, 26 Mar 2006 07:38:59 -0800, altownsend{at}dccnet.com wrote:

>Watch your drivers CDROM.DMD Version 10.157 is a must and also latest USB drivers
>
>To find what version you have go to a command prompt and then at
x:OS2\BOOT do bldlevel CDROM.DMD and if you have less than 10.157 upgrade
the driver
>
>Watch config.sys:
>
>REM 
>REM *** RSJ CD-Writer File System ***
>REM 
>REM RSJ 6.0
>REM 
>BASEDEV=OS2ASPI.DMD /ALL
>IFS=D:\CDWFS\CDWFS.IFS
>RUN=D:\CDWFS\CDWFSD.EXE -p "D:/LOTUSW4/TEMP" -c20000 -b2048 -t2 -i3 -s0
>REM BASEDEV=LOCKCDR.FLT *** Not needed ***
>REM DEVICE=D:\CDWFS\RSJSCSI.SYS *** Not needed ***
>
>BASEDEV=LOCKCDR.FLT, D:\CDWFS\RSJSCSI.SYS are NOT needed with the
latestest drivers
>
>If you have a wrong combination of drivers, then RSJ or System will hang
>
>Regards Al

Thanks, Al.  This seems to have helped a good bit.  I did NOT
have the latest drivers.  Now I can properly access both CD
players with data disks via FileStar/2.

But, I still have the problem with the CDROM not being able to
play a music CD.  And also, I had the boot stop very early with
a complaint about the floppy disk and had to press F1 to keep
going.  Any further ideas?

Thanks,

Jerry

--
"We find by fatal experience that Congress consists of too many
members to keep secrets."  B. Franklin




 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---