-= Pete Replied to Paul Edwards about: USR Courier V34 problems =-

G'day Paul

 PC> USRobotics Courier HST Dual Standard V.34+ Fax Settings...
 
 PC>    B0  C1  E1  F1  M1  Q0  V1  X7
 PC>    BAUD=19200  PARITY=N  WORDLEN=8
 PC>    DIAL=HUNT   ON HOOK   TIMER
 
 PC> ** [now changing port speed to 115200]

 PE> Now try doing it again, except this time, after seeing a
 PE> successful return from ATI4, get someone to ring your phone
 PE> number, and see if the USR will say "RING" to you.

ok here goes,

[starting telix at 57600]

ati4

USRobotics Courier V.32bis Dual Standard V.34+ Fax Settings...

   B0  C1  E1  F1  M1  Q0  V1  X7
   BAUD=57600  PARITY=N  WORDLEN=8
   DIAL=HUNT   ON HOOK   TIMER


[* changing to 19200 *]

ati4

USRobotics Courier V.32bis Dual Standard V.34+ Fax Settings...

   B0  C1  E1  F1  M1  Q0  V1  X7
   BAUD=19200  PARITY=N  WORDLEN=8
   DIAL=HUNT   ON HOOK   TIMER

[ now ringing modem line ]

RING

RING

RING

RING

RING

RING


 PC> i only use to get 21600 with M11F's 24000->26400 with early
 PC> M34F's and 26400->28800 with later M34F's. BTW what type Netcomm
 PC> are you connecting to.

 PE> I've just changed ROM levels back one level, and now instead of
 PE> connecting at 26400 first time every time he is connecting at
 PE> 24000 *almost* every time.  The odd instances have been at 26400
 PE> and 21600.  Anyway, he is using...

so have i and my 28800 connects to M34F's have turned into 21600
connects, the earlier SDL issues ATS54=64&W after it loads the code
which turns off the V8 tones, i might try S54=0 to see if i can get my
28800 connects back.

 PE> Netcomm Series 5 SmartModem M34F (SM3400) DFS256K(K)-Z7 V2.61L

this looks like the later M34F unless the late code has been loaded
into an early M34F, can you get the owner of the netcomm to issue
AT#V0I6#V1 to get the Rockwell chip ID .

   -=Pete=-

--- OMX/Blue Wave v2.12