On Sun, 02 Jul 2006 12:02:47 -0500, Steve McCrystal wrote:

>
>I haven't tried it, and sincerely hope I NEVER have to, but SciTech Snap 
>has check boxes for "4:3"  and "Wide Resolutions". 

Thanks for the suggestion.  Unfortunately, recent SnapSE versions
don't work right on my system.  I currently have v2.3 installed
from mid-'04.  That does work and offers a choice of 4:3 and 16:9. 
I assume 16:9 is for wide screen.  I have the correct monitor
selected in the properties box.  However, it is still stretched. 
Probably due to the age of my version of Snap.

When I install the new Snap, there is a 5 min (I timed it!!!) delay
after the splash screen and before the wps starts.  Although the
new snap will probably solve my problem, I removed that version
prior to installing the monitor so don't know for sure.

Based on your suggestion I installed it on another computer that I
have laying around here that has eCS v1.2r on it and it does work
correctly, with the delay a very reasonable 20 seconds.

I don't know why I have problems w/ SnapSE on my main system. 
Probably because it has been migrated from eCS v1.0->1.1->1.2.  It
previously had SDD and earlier Snap versions.  I tried to remove
all traces of the previous versions but maybe have something laying
around that I missed.  This doesn't seem like a likly cause but it
is all I can think of (other than I am running SMP on this system).
 Before v3.1.6 I have not had success installing newer versions of
Snap and have remained with the older one that works.

Hope I don't have to live with it, and reinstalling the OS would be
very tedious w/ all the apps to install.

Thanks, Jon


===================END FORWARDED MESSAGE===================




------------------------ Yahoo! Groups Sponsor --------------------~--> 
Check out the new improvements in Yahoo! Groups email.
http://us.click.yahoo.com/6pRQfA/fOaOAA/yQLSAA/9rHolB/TM
--------------------------------------------------------------------~-> 

 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 




---