Sun, March 26, 2006 - 07:38 AM

Hi Jerry

Watch your drivers CDROM.DMD Version 10.157 is a must and also latest USB drivers

To find what version you have go to a command prompt and then at x:OS2\BOOT
do bldlevel CDROM.DMD and if you have less than 10.157 upgrade the driver

Watch config.sys:

REM 
REM *** RSJ CD-Writer File System ***
REM 
REM RSJ 6.0
REM 
BASEDEV=OS2ASPI.DMD /ALL
IFS=D:\CDWFS\CDWFS.IFS
RUN=D:\CDWFS\CDWFSD.EXE -p "D:/LOTUSW4/TEMP" -c20000 -b2048 -t2 -i3 -s0
REM BASEDEV=LOCKCDR.FLT *** Not needed ***
REM DEVICE=D:\CDWFS\RSJSCSI.SYS *** Not needed ***

BASEDEV=LOCKCDR.FLT, D:\CDWFS\RSJSCSI.SYS are NOT needed with the latestest drivers

If you have a wrong combination of drivers, then RSJ or System will hang

Regards Al


In , on 03/26/2006 
   at 09:59 AM, "Jerry Prather"  said:



>Hi all,

>I have just installed a Plextor 740 IDE in my eCS computer, and it works
>just fine as a backup data system using RSJ 6.0. 
>However, my old CDROM no longer works.

>To explain further, the system has a rather unusual combination of one SCSI
>hard drive and one IDE hard drive.  The CDROM is
>also SCSI and has always worked well with CDPM.exe as a player.  The IDE
>hard drive is installed as master on the primary IDE bus and the new
>Plextor is installed as master on the secondary IDE bus.  After
>installation of the Plextor and RSJ, the old SCSI CDROM no longer will play
>a music CD.  I can get it to read a
>data CD, but once a music CD is inserted, I get a "Drive not
>ready" error.

>I suspected that the problem might be that RSJ installed it's
>own SCSI driver.  I tried deleting the driver from CONFIG.SYS, but the
>reboot failed right at the point of loading RSJ drivers.
> 

>I guess that I could just yank out the old CDROM and plug the
>audio cable into the Plextor, but that seems to be the cowards way out. 
>  Anyone have any ideas??

>Thanks,

>Jerry

>--
>"We find by fatal experience that Congress consists of too many members to
>keep secrets."  B. Franklin




> 
>Yahoo! Groups Links



> 




-- 

  (\__/)
  (='.'=)     This is Bunny. 
 (")_(")   
  
Copy and paste bunny into your
signature to help him gain world domination.


*****************************************
* Alan Townsend      Sechelt, BC Canada
*
*  E-Mail:                  altownsend{at}dccnet.com
*  Home Page:
*  Tel:                      (604) 885-0943
*  
*  Mr2 Ice:                 Reg #582
*****************************************





 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---