MF> I have a Netcomm Smartmodem M11F and I was wondering if anyone
 MF> out there could give me a printed/message copy of the setup on
 MF> the static ram, as well as any addtional init string they may

Here's mine, however you may not have all these settings in your firmware.
I can't remember which features are standard - it's been too long. Go
through four or five at a time, and the ones which don't report ERROR, use.

ACTIVE PROFILE (STORED #1) :
B0  E1 L1 M1 T Q0 R0 V1 W2 X4 &B4 &C1 &D2 &G0 &H0
&K3 &L0 &M0 &N1 &P1 &R0 &S1
&T4 &X0 &Y9 \A3 \B3 \J0 \K5 \N3 \T0 \V0 \X0 #A2 #B0 #C0 #E0 #F0
#I0 #J1 #K0
#O0 #V0 %B1 %C2 %D0 %E2 %F1 %G0 %H0 %K0 %M4 %N0 %P0 %X1 -Q0 :E0 *A1 *J0 *L9
S000:000 S002:043 S003:013 S004:010 S005:008 S006:002 S007:060 S008:004
S009:006 S010:018 S011:070 S012:050 S018:000 S025:005 S026:000 S030:000
S033:003 S042:016 S043:015 S045:098 S047:008 S066:010 S067:042 S069:060

IP Address : 173.0.0.0 (Slave)
Sync Clock : Internal
Voxelan    : Off
NRBU       : Off
Mode LEDs  : Disco!
TD Thresh  : 140% (80%/2019)
This is a test message which you shouldn't be reading

OK

-- Lewin A.R.W. Edwards [Team OS/2]  Tel 0419320415 * 0412809805 * 0414927056

--- GoldED 2.41+