Ed Durrant wrote:

> Make sure your drive with data is the first drive and configured as the 
> "primary" connect and configure the second drive as the
"secondary". The 
> primary synchronises its data to the secondary, not the other way around.
> 
> This is assuming you are using RAID-1 (Mirroring), creating a Raid-0 
> (striped) array would destroy any data on both drives.
> 
> Cheers/2
> 
> Ed.
Thanks,Ed. My SATAand rais are on the mobo.The rais cinfiguration allows
the selection of ALL drives connected,both IDE and SATA.So I can select
the one with data as the first drive and the new on as the second
one,deselecting all the iDE drives.I thought that was the way to go.


 
Yahoo! Groups Links

 To visit your group on the web, go to:
    http://groups.yahoo.com/group/os2hardware/

 To unsubscribe from this group, send an email to:
    os2hardware-unsubscribe{at}yahoogroups.com

 Your use of Yahoo! Groups is subject to:
    http://docs.yahoo.com/info/terms/
 



---