-= Pete Replied to Paul Edwards about: USR Courier V34 problems =-

G'day Paul

 PE> I'm not sure if I described it satisfactorily...

 PE> The last &W was done at 57600.  I then go and use 38400.  I type
 PE> in ATZ.  It auto-detects the AT and sends the response, "OK" back
 PE> to me at 38400.  I then proceeds to send the "RING" word to me
 PE> at 57600.  It's either designed wrong, or it's a bug.  There is
 PE> absolutely no sense in using two different baud rates to my session.
 PE> Didn't happen with my Spirit II either.

I just tried exactly what you explained above, my modem is set to
57600 normally i changed the terminal speed to 38400 and issued ATZ it
returned OK with the port at 38400, i then rang the number the modem
is on and it returned RING still at 38400.

I'd say the Courier your trying out is a dud :-(

My setup is.

Software. Telix 3.22
Modem. USR Courier 

ati7

Configuration Profile...

Product type           Australia External MSK
Options                HST,V32bis,Terbo,V.FC,V34+
Fax Options            Class 1/Class 2.0
Clock Freq             20.16Mhz
Eprom                  256k
Ram                    32k

Supervisor date        07/18/95
DSP date               07/05/95

Supervisor rev         061-6.2.2
DSP rev                1.2.2

OK

   -=Pete=-

--- OMX/Blue Wave v2.12