Peter, at 14:37 on Feb 06 1996, you wrote to Paul Edwards...

PC> [starting telix at 57600]

PC> ati4

PC> USRobotics Courier V.32bis Dual Standard V.34+ Fax Settings...

PC> B0  C1  E1  F1  M1  Q0  V1  X7
PC> BAUD=57600  PARITY=N  WORDLEN=8
PC> DIAL=HUNT   ON HOOK   TIMER

PC> [* changing to 19200 *]

PC> ati4

No good, Pete.  The modem has already auto-bauded on that AT command, and
is now set to 19200.  See ?

PC> BAUD=19200  PARITY=N  WORDLEN=8

Try again, but after changing Telix's baud-rate to 19200, immediately ring
your modem.  You should now see gibberish instead of RING.  Any AT command
(apart from ATZ) will auto-baud the modem to match the current serial port
setting.

Regards, Bill

--- Msgedsq/2 3.20