Paul, at 08:18 on Feb 12 1996, you wrote to Ian Smith...

PE> The former is irrelevant, as Rod reports that the retrain happens
PE> AFTER the connect.

Be a bit hard to retrain BEFORE the connect, wouldn't it ?

PE> # 09 Feb 02:29:32.06   Carrier Freq (Hz)        0/0
PE> # 09 Feb 02:29:32.06   Symbol Rate              0/0
IS> [..]
PE> # 09 Feb 02:29:32.18   Recv/Xmit Level (-dB)    0/0
PE> # 09 Feb 02:29:32.18   Roundtrip Delay (msec)

IS> Hmm, have you already had Binkley issue an ATZ at this stage?

PE> No.  If I had done that the "chars sent" etc would be 0 as well.

And if you'd bothered reading the USR manual, you'd have noticed that the
ATI6 and ATI11 aftercall stats are only generated on V.FC and V.34
connects, and not V.32bis connects such as the one above.

Regards, Bill

--- Msgedsq/2 3.20