DH->It's not USR's fault - it's inherent in the situation.  After a
PE->reset,
DH->the modem has no record of the DTE baud rate - but it can, and
PE->does,
DH->remember the last AT&W baud rate, that's permanent.

AvE> I dunno about that... I can't find a way to make my modem behave
PE->like that
AvE> - and it has a Rockwell chipset. The AT&W was done at 57600... and
AvE> switching rates to 300, turning the modem off and then on, and the
PE->rings
AvE> come up as they should.... Wierd?

PE->How did you get the RINGs?  If you issued an ATDT command from
PE->your 300 bps terminal, it would have done the auto baud rate
PE->detect then.  Otherwise, you should see hydro-gliphics (sp? :-))
PE->like everyone else.  BFN.  Paul.

I dunno... it just... happened.

... Nothing is so smiple that it can't get screwed up.


Andre van Eyssen

ÚÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ¿
³ One who is not wise himself cannot be well advised. ³
³                              -- Niccol• Machiavelli ³
³                                   The Prince, XXIII ³
ÀÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÙ
--- 111.01.e1.10