DP>in the stock.  As it turns out, this is pretty easy to achieve in the 
0/22
DP>just by removing material from the barrel channel and applying your choice
DP>of bedding compound.  The fit of the action into the wood is loose enough
I used a 3/4 shaft sanding drum and fine grit tubes, came out to almost 
exactly the diameter of my solid bull barrel.
DP>finished off perfectly even with the top of the fore end.  A thin black
DP>line is the only hint of the Glasbed underneath.
The more I think about it, the more I think bedding a ruger 10/22 bull 
barrel is unnecessary, there is just not nearly the foce one encounters 
in a high power centerfire.  Ultimately, I'd like to socket the barrel to 
the stock in 3 places, float the action, and mount a scope directly to
the barrel.
DP>shots, I moved onto the targets, and fired the following 10 shot groups:
DP>Remington Target--0.535", with one called flyer, 0.260" for remaining 9
DP>shots; CCI Green Tag--0.410"; CCI Standard Velocity--0.515".  All
I ran about .5" inches, with really benchresting, I think the potential 
to get down to about 1/3" in there.
þ SLMR 2.0 þ Nobody (with armed guards) needs a gun like that!
* LAKOTA v1.5
--- Alexi/Mail 2.02 (#10000)
---------------