From: "Aditya Munshi" 
To: 
Reply-To: "Aditya Munshi" 


Hi guys,

My experience with aluminum foil is quite discouraging, I used it for
making surethe mirror didn't stick to the lap while pressing, but was soon
to notice that the foil can give small scratches to the mirror, these can
be polished out but I've never foil  since.


Aditya Munshi


-----Original Message-----
From: owner-atm{at}shore.net [mailto:owner-atm{at}shore.net] On Behalf Of
Hugues.Laroche{at}ses-astra.com
Sent: Thursday, July 31, 2003 11:55 AM To: Bob Walker
Cc: ATM Group; owner-atm{at}shore.net
Subject: Re: ATM New Aluminum Foil



>There's a new aluminum foil made by Reynolds called Release.

>Should remove easily from laps without
>leaving bits and pieces behind.

The best is to test before hand! I have ruined a lap because of having used
a too thin Alu foil! I never got all the little Alu pieces from that pitch,
it was really a pain in the b...asement of the house to get it out.

I think that stick or non-stick I will never attempt that again...

Hugues





--
DISCLAIMER:
This e-mail contains proprietary information some or all of which may be
legally privileged. It is for the intended recipient only. If an addressing
or transmission error has misdirected this e-mail, please notify the author
by replying to this e-mail. If you are not the intended recipient you must
not use, disclose, distribute, copy, print, or rely on this e-mail.

--- BBBS/NT v4.01 Flag-5