Hello All!

I've set up my USR v34+ line to accept faxes routing through BGfax 1.60/z.
I have some problems receiving fax's ie., no scanned lines.
When I modify the bink.cfg file to reflect the way BG show the bink/usr
setup I cannot poll correctly a node, ie., I call, it answers, 1-2 seconds
of delay then bink reports incoming call and hangs up.  My current setup
(inbink.cfg) is as follows:

=== Cut ===
[%Task%==1]
; US Robotics V.everything

PutEnv        ADAPTER=MODEM
PreInit      |v``^``
; PreInit      |v``^``ATZ|~AT+FCLASS=2\.0|~
DTRHigh
Busy         ATM0H1|
;Suffix    ~|
; Predial      v``^`           ; used for non fax <<<<<<<
PreDial    `
Init         ~ATZ|~          ; used for non fax <<<<<<<
; Init         AT+FAA=1;+FLI="+44-1279-792300";+FNR=1,1,1,1|
; TermInit     ATZ|            ; not used for fax ????
; Prefix       ATDT            ; used for non fax <<<<<<<
; Prefix       AT+FCLASS=0;DT
Prefix       AT+FCLASS=0&K0DT
; Answer       ATA|              ; used for fax and non fax <<
Answer
AT&K3+FCLASS=2\.0|AT+FLI="+44-1279-792300"|AT+FBO=1+FLO=2+FAA=1+FNR=1,1,1|ATA|
; Answer
AT&K3+FCLASS=2\.0|AT+FLI="+44-01279-792300"|AT+FNR=1,1,1,1;+FAA=1;+FCR=1;+FLO=2
;+FIS=1,3,0,2,0,0,0,0|ATA|
NoFilter     /ARQ
ModemFax     +FCO
; Faxbaud      19200   ; not used for external fax
ExtrnMail    70 +FCO   ; fax processing
; ExtrnMail 70 FAX    ; no fax processing exists yet [this is old one]
; AfterCall    16 ATI6|     ; This never worked without rem of init atz string
BIDIBAUD     2400

CostTimeCorrection 13 4
; CostCPS            1500

ModemTrans 32                   ; Don't dial ISDN
ModemTrans 16                   ; Don't dial ISDN
ModemTrans 8                    ; Don't dial ISDN
ModemTrans 6 ATDT               ; Dial V.34
ModemTrans 5 ATDT               ; Dial V.FC
ModemTrans 3 ATDT               ; Dial nodes...
ModemTrans 2 ATDT               ; where both...
ModemTrans 1 ATDT               ; modems fit the same.

=== Cut ===

Note that the USR v34 has the UK flash upgrade to give v34+.

I've tried various combinations but with no solid success. If anyone has a
working solution that allows incoming fax/mailer/bbs calls and outgoing
mailer calls (no outbound fax as I use WinFaxPro), I would appreciate
hearing from you.


Vince

--- ADEPT 1.07/GoldED/2 2.50+#10UK3 under OS/2