On 25/07/17 09:00, Big Bad Bob wrote:
> On 07/20/17 03:17, T Obulesu wrote:
>>   Hello all,
>> I have a raspberry pi3 and installed with Raspbian image.
>> I'm running few python applications in it.
>> I want to make a new Image with the existing image that should include
>> my python applications and install this image in 100 new BBBs...
>> And few things like ifconfig settings (set a static IP), internet
>> settings and installation of python libraries should be automatically
>> done while the image installation is in progress..
>> How can I do this?
>> Is it possible?
>>
>
> if not already mentioned...
>
> 1. use a Linux or BSD computer
> 2. use the 'dd' program on the SD card directly (yeah remove from Pi
> first after doing a nice controlled shutdown) to create an image file
> 3. copy that image onto other SD cards for the distribution
> 4. mount each copied image individually and edit the appropriate files
> from the Linux or BSD computer.
>
> And if the libraries are already installed on the copied image, you
> won't have to do it again.  Just mount the copied SD image, and edit
> config files and voila!
>
> It's also possible to mount the image file directly if you want to
> update things, then copy the updated image to SD cards.
>
BBB is not a pi.
its a beagle bone AEM based PC with onboard non detachable flash AFAICT.




--
Labour - a bunch of rich people convincing poor people to vote for rich
people
by telling poor people that "other" rich people are the reason they are
poor.

Peter Thompson

--- SoupGate-Win32 v1.05