In a message of  David Krogh (3:690/254) wrote:

 DK> feature and it says xoff and this happens about every 2 seconds
 DK> through the upload and its slowing it down so much that it ends up

This sounds very much like a config problem. I assume you have some reason
for using the slower and less reliable XON/XOFF flow control method ?? I
know that Telix and ANY higher speed Netcomm has CTS/RTS available. The
most obvious thing to do would be to turn on CTS/RTS in the modem and in
the terminal. Make sure you have a serial cable with at least 7 cables
connected as CTS/RTS is hardware flow control.

 -= Kev =-

 ... Windows speed tip: type DEL \WINDOWS\*.*

---