-=> Quoting some body, I think Ken Schmidt <=-
 
 > Yes, I am using the -22 beta since 9/18. It works very well except 
 > for one
 > thing. My SupraSonic display is configured to show ALL connection 
 > data but
 > when I use it on my PPP Internet account all I see is the first 
 > screen and
 > just the RX speed, TX speed is blank. Is this the way it works with 
 > PPP or
 > do I have to reconfigure something? On a non Internet connection to 
 > a BBS
 > the display alternates data screens as it is supposed to.
  I sent a message about this to some one a couple of weeks ago..maybe you-
 but we had some problems here and it got lost.
 I was using the fax-modem, but should translat to the Supersonic.
 I had the same thing: When in my regular terminal program, display was what
 I wanted, but in PPP it only showed RX speed. The reason is I set up with
 &F2 plus some things, in terminal; but the internet connection by default 
as
 setting the modem up using &F plus some things..thus the difference. 
   What I am saying is that the default of the S194 register is different 
 in the two cases. I forget the  exact S194 setting that you want  and 
 what I used--lost my 33k to ligntning- so can't look. 
   There is a file (at336cmd.txt) ??? that gives all of the commands that
 exist..about 10 pages of them. There are more that they add every week,
 Watch this echo for things like a star-burst-screen saver setting.
  Hope this helps.
  Kenny P
--- TriToss (tm) Professional 10.0 - #110
---------------
** A related thread FOLLOWS this message.

FIDO MESSAGE AREA==> TOPIC: 267 SUPRA MODEMS  Ref: DEFP0740 Date: 10/11/96
From: KEN SCHMIDT                                           Time: 08:12pm
\/To: KENNETH PIERCE                                      (Read 3 times)
Subj: R: Re: BETA -22

KS > when I use it on my PPP Internet account all I see is the first
KS > screen and just the RX speed, TX speed is blank. Is this the way
KS >it works with PPP or do I have to reconfigure something? On a non
KS >Internet connection to a BBS the display alternates data screens as it
KS >is supposed to.
 
KP>I sent a message about this to some one a couple of weeks ago..maybe
KP>you- but we had some problems here and it got lost. I was using the
 
No, it was not me.
 
KP>fax-modem, but should translat to the Supersonic. I had the same
KP>thing: When in my regular terminal program, display was what I wanted,
KP>but in PPP it only showed RX speed. The reason is I set up with &F2
KP>plus some things, in terminal; but the internet connection by default
KP>as setting the modem up using &F plus some things..thus the
KP>difference.
 
KP>What I am saying is that the default of the S194 register is different
KP>in the two cases. I forget the  exact S194 setting that you want  and
KP>what I used--lost my 33k to ligntning- so can't look.
 
The new firmware sets the S194 reg to 42 as a default. See below for
the explanation of the TX/RX speed display.
 
KP>There is a file (at336cmd.txt) ??? that gives all of the commands that
KP>exist..about 10 pages of them. There are more that they add every
KP>week, Watch this echo for things like a star-burst-screen saver
KP>setting. Hope this helps.
KP>  Kenny P
KP>--- TriToss (tm) Professional 10.0 - #110
 
Yes I have been using (at336cmd.txt) for some time. It is getting out
of date as it was for the -12 firmware and we all know that many nice
things have been added since then that are only documented in each
upgrade readme file.
 
Thanks for the tip on how to get my SupraSonic display to work correctly
with my Internet PPP account. I used the Netscape Modem Wizard to setup
the modem. The interface was so slick that I never thought that it might
not be using the correct init codes. Upon checking what it had setup I
found it used &F instead of &F2 in the init string. Changing it to &F2
fixed the display.
 
I decided to check the S regs and see why it did not work before. S210.3
sets how the display looks. &F sets S210.3=0 which uses the same speed
for TX and RX. &F2 allows different TX and RX speeds in the display.
---------------
>>>>>>>>>>>>>>>>>>>>>> LAST Message In Thread <<<<<<<<<<<<<<<<<<<<<<

FIDO MESSAGE AREA==> TOPIC: 267 SUPRA MODEMS  Ref: DEE00010 Date: 10/09/96
From: HANS JOHNSON                                          Time: 09:16pm
\/To: JOHN MEDLAND                                        (Read 4 times)
Subj: New Supra Files

JM> Is my modem flashable? It returns the following:
JM> SupraExpress 288i PnP
Nope, Sorry.. You need a real SupraFAXmodem to use the flashroms... To 
upgrade the firm ware in the Express, you need to replace the rom chim (in 
much the same was as a USR sportster).  For obvious reasons Supra will only 
release new chips for verry major upgrades (ex: the 28.8-33.6 speed boost).
Hans 
--- FMail 1.02
---------------