LT>I came across the information in the USER GUIDE page 129 after Tech 
upport
  >told me how to do it. But it is not listed in either the front or back of
  >dox.
I see you are like me, throw the book on the shelf, read only in
emergency
 LT>LT>>Modem commands.
  >  >>In 1.53 you could access your modem from the terminal screen. In that
  >  >>screen
  >  >>you could send commands to your modem and even direct dial without
  >loading
  >  >>it in the phone book.  Sure there is a manual dial, but MSI techs say 
yo
  >  >>can't get into terminal mode to enter a phone number or modem 
ommands.
  >  >>The
  >  >>modem can be manipulated from the options window, but it can't.
LT> LO> I didn't think so either. Pull down CONNECTIONS window and select 
DIREC
  > LO> CONNECTION.
LT>I cheated, I went into QMPro dos term screen and typed in the modem 
command 
  >wanted ATs11=50 then tacked on a &W wrote it to RAM. 
LT>Now on page 30 and 126 it talks about Direct Connect, but I see noway for 

  >person to enter AT commands. So as dumb as this sounds, please walk me
  >through it.
Agree, it is not very clear on it
Select CONNECTIONS from the top menu bar, that drops a window with
other options. From that window select DIRECT CONNECTION, this will open
a dialog box window with you comm ports, data bits, etc. The info
entered will be from your settings and probably correct. If info entered
is correct select OK if not enter correct info then select OK. This will
close all these windows and return you to the terminal mode screen, just
like in 1.53. Then just enter your commands.  Hope this helps.
Later,  Larry
larry.ohlinger@aspen.cmhnet.org
 
---
 * QMPro 1.53 * CCITT- Can't Conceive Intelligent Thoughts Today
--- WILDMAIL!/WC v4.12 
---------------