On Sun Oct 06 at 16:44, Kenneth of 1:116/157 wrote to Bob:
BM> It is readily apparent that the upload is very "touchy" and many
BM> people will have to experiment to get it to work.  For some, it works 
BM> right away.
 KD> For my system, I flash in a DOS SESSION under OS/2 Warp v4.0 using
 KD> DSZ command line commands...
 KD> FIRST:  ECHO AT&C0 > com1
 KD> SECOND: ECHO AT** > COM1
 KD> THIRD: DSZ PORTX 3F8,4 SX BET1201.SB7
 KD> Replace the com port in the above with the one you are using.. Make
 KD> sure you know what HEX your com port is... and the IRQ too... I
 KD> don't have to unlock my port, or do anything fancy... It works
 KD> great! 
This is great info.   I tried to use FD's terminal program and the upload 
always failed.   I ended up migrating the Supra to another PC and used TE/2 
successfully.  
Your report that DSZ does not require "unlocking" the port is good news.  My 
OS/2 machine had locked port at 115200 and this speed seemed to be a problem 
according to the flash docs.
But I'll give DSZ on the next upgrade.  Right now I am with the -18 code and 
sofar things are acceptable.
  ...AA 
     august@etc.mn.pubnix.net (MTLnet)
 
--- FMail/386 1.0g
---------------