LT>>OLX
  >>In 1.53 you have a radio button or from the terminal screen you can use
  >>ALT-M. But in QMW I see no way to access it, nor is there anything in the
  >>dox.
 LO> and type in   @SHELL C:\QMWIN\OLX\OLX.EXE   (path to your OLX). Then
 LO> HINT:  If you continue to use the QMpro 1.53 you will have to use the
 LO> same DOWNLOAD and UPLOAD directories for both 1.53 and win95 as OLX is
I came across the information in the USER GUIDE page 129 after Tech Support
told me how to do it. But it is not listed in either the front or back of
dox.
LT>>Modem commands.
  >>In 1.53 you could access your modem from the terminal screen. In that
  >>screen
  >>you could send commands to your modem and even direct dial without 
oading
  >>it in the phone book.  Sure there is a manual dial, but MSI techs say you
  >>can't get into terminal mode to enter a phone number or modem commands.
  >>The
  >>modem can be manipulated from the options window, but it can't.
 LO> I didn't think so either. Pull down CONNECTIONS window and select DIRECT
 LO> CONNECTION.
I cheated, I went into QMPro dos term screen and typed in the modem command I
wanted ATs11=50 then tacked on a &W wrote it to RAM. 
Now on page 30 and 126 it talks about Direct Connect, but I see noway for a
person to enter AT commands. So as dumb as this sounds, please walk me
through it.
Lyle M. Taylor - Rapid City, So. Dak - FIDOnet 1:293/643 
--- Via Silver Xpress V4.3P SW12290
---------------