On Feb 21, 1996 at 20:30 hrs, Paul Edwards of 3:711/934.9 wrote to All:

Hello Paul,

PE>> So far the only thing I have changed is to go "ATS0=0 and
PE>> AT&W".  BFN.  Paul.

PE> Scratch that, I didn't like getting "CONNECT xxx" without the
PE> EC data, so I went investigating the commands, and so now I am
PE> running with:

PE> ATS0=0
PE> ATS2=255
PE> ATM0
PE> AT&K3
PE> AT&D2
PE> AT\V9
PE> AT%C2
PE> AT%M1
PE> AT%U2

I set &B2 &T5 \T10 \X0 #A0 #B0 #C0 #K0 %D5 %E1  as well as the ones
you have selected except that I'm using \V1 not \V9.

You might want to set the %L to a more reasonable level than -13dbm - %L10
or %L11 should be nearer the mark.  I was getting 26400 and 24000 connects
to another M34F but now get 28800 connects since we both shifted to %L11.

PE> Also, I have made a call to Dave Hatch, and got a connect of 26400
PE> instead of 28800.  I was expecting this to happen, and it did.  :-)

Setting %L11 or %L10 may help here.

Regards ... John
@EOT:

--- MsgedSQ/2 3.30